Product Description

Features

◆High accuracy
◆Strong anti-interference ability  
◆Response quickly
◆Long-term stability
◆Without calibration
◆Convenient application
◆Clarity data

Usage

In general connections, sensors, wires, LCD and PSU are required.

The PSU connects the LCD to the power supply, and the cable connects the LCD to the sensor (J2 port).

It can detect that the oxygen concentration in the air is 21% 

Pulse flow rate refer to the figure on the right

Working logic of pulse sensor is explained in detail

Pulse sensor is a part used in oxygen concentrator, Winpower Technology Co., Ltd. tailor-made for its rich working mode to meet the various potential needs of different customers.
Before using the pulse sensor, it is necessary to understand its several working modes.
①Off mode: The portable oxygen generator is in standby/stop mode, the sensor can be set to
off mode, and the sensor will close the relevant solenoid valve to reduce power consumption
and extend battery life.
②Pulse mode: When the portable oxygen generator is in pulse mode, the sensor is set to pulse mode.When the sensor detects the breathing signal, 

it will open the pulse valve for gas supply according to the air supply time set by the main board for the sensor.
Note: When breathing is not detected for a period of time, the sensor will automatically enter a fixed pulse mode. 

That is, according to a fixed period, open the pulse valve with a fixed time to supply gas, to avoid the failure of the machine caused by breathing, 

and automatically switch back to the pulse mode when

breathing is detected.
③Direct supply mode: When the portable oxygen generator is in direct supply mode, the portable oxygen generator's gas 

supply mode is the same as that of the traditional oxygen generator, which continues to supply gas at a certain flow rate.

④Fixed pulse mode: The portable oxygen generator is in fixed pulse mode, which is generally not used.

Readings and button explanations

Pipeline structure

UART communication parameters

Packing&Shipping

Small box (42*30*24cm) : 30 PCS/layer *4 layers =120PCS Large box (two small boxes inside, 50*32*44cm) : 120*2=240PCS Big box net weight: 5KG Gross weight: 7.2KG

FAQ
Q: Are you a factory or trading company?
A:We are a Professional Manufacturer for ultrasonic oxygen sensors.
Welcome to our company, our company, show room and factory in same place.

Q. Where is your company?
A: 2nd floor, 6# Building, Zone A, Baosheng Industry Zone, No.6 Tangbian Road, Bainikeng Village, Pinghu, Longgang District,
Shenzhen City, Guangdong Province, P.R.China. Welcome to our company.

Q. What is your trading term?
A:1. Payment term: T/T, or PAYPAL for small amount .
2. Lead time: normally in 2-30 days after receiving the payment.
3. Sample policy: Samples are always available for each model. Samples can be ready in 2-5 days once payment received.
4. Shipping: send by EXPRESS
5. Discounts: We offer discount for big quantity.

Q: How to purchase your product?
A:Quotation → PI → Confirm PI → Arrange payment →Producing → Shipping

Q: Can you provide the OEM service?
A: Yes